| | |

Ventilation unit with ventilator, 56 dB(A)

2.00.339-1

Product information "Ventilation unit with ventilator, 56 dB(A)"
Reference no.:
2.00.339-1
Product group:
Exhaust air systems
Use/program section:
Ventilation of safety cabinets
Catalogue page:
387
Outer width [mm]:
440  - (17.32 inch)
Outer depth [mm]:
500  - (19.69 inch)
Outer height [mm]:
370  - (14.57 inch)
Gross weight [kg]:
10  - (22.05 lbs)
Colour:
silver, pearl glimmer effect
Inner width [mm]:
320  - (12.60 inch)
Inner depth [mm]:
290  - (11.42 inch)
Inner height [mm]:
270  - (10.63 inch)
ATEX compliant:
Material outside:
sheet steel
Ventilator:
integrated, model: 2.00.176-1
Voltage/frequency [V/Hz]:
230/50
Nominal current [A]:
0.1
RPM [1/min]:
2600
Volumetric flow rate [m³/h]:
72
Noise level:
Lp5A 56 dB(A)
Connection:
ready to plug in, IEC-60320 C13 appliance side connector; collar diameter: 75 mm
Mark of approval by TÜV:
type certificate TÜV Süd
Complies with:
DIN EN 14986
2.00.320-1

Art.: 2.00.320-1

Exhaust air monitor with ventilator, 34-56 dB(A)
29-201267-030

Art.: 29-201267-030

CLASSIC line standard
according to DIN EN 14470-1
2.00.340-1

Art.: 2.00.340-1

Ventilation unit with ventilator, 37 dB(A)
70-201340-003

Art.: 70-200740-001

Gas cylinder depot
29-061169-003

Art.: 29-061169-003

UTS ergo line
according to DIN EN 14470-1
2.00.179EX

Art.: 2.00.179EX

Radial ventilator, low noise level, explosion-proof, 54 dB(A), IP 54
2.00.176EX

Art.: 2.00.176EX

Radial ventilator, low noise level, explosion-proof, PTC-resistor, 54 dB(A)
Extended basic package temperature monitoring storage area H2 for BATTERY line without CPW

Art.: 69-70000-812

Extended basic package temperature monitoring storage area H2 for BATTERY line without CPW
Extended basic package SMS dispatch module for BATTERY line

Art.: 69-70000-809

Extended basic package SMS dispatch module for BATTERY line
Package interior fittings 4x stainless steel and CPW for BATTERY line XL with CPW

Art.: 69-70000-242

Package interior fittings 4x stainless steel and CPW for BATTERY line XL with CPW
Package interior fittings 4x stainless steel for BATTERY line XL without CPW

Art.: 69-70000-240

Package interior fittings 4x stainless steel for BATTERY line XL without CPW
69-70000-234

Art.: 69-70000-234

Package storage areas marking 4x for BATTERY line M, L, XL without CPW
69-70000-233

Art.: 69-70000-233

Package storage areas marking 3x for BATTERY line S
4.10.022

Art.: 4.10.022

VisiCon moistener, stainless steel, with sight glass, 2 l
29-201262-030

Art.: 29-201262-030

PREMIUM line standard
according to DIN EN 14470-1
2.00.390-1

Art.: 2.00.390-1

Filter unit with ventilator and exhaust air monitor, 38-56 dB(A)
29-11160-085

Art.: 29-11160-085

ToeKick base UTS ergo line L, LD, LT
Roller set for UTS ergo line L, XL,

Art.: 29-11400-011

Roller set for UTS ergo line L, XL,
69-70000-808

Art.: 69-70000-808

Extended basic package exhaust air monitor Erweiterung for BATTERY line
69-70000-810

Art.: 69-70000-810

Basic package - Smart Control with touch display incl. sensors for BATTERY line S, M
59-200971-007

Art.: 59-200971-007

COMPLEX line standard
according to DIN EN 14470-1
29-061168-021

Art.: 29-061168-021

COOL UTS ergo line
according to DIN EN 14470-1
73-200960-011

Art.: 73-201260-011

ECO line plus
according to DIN EN 14470-2
79-201460-021

Art.: 79-201460-021

SUPREME line plus
according to DIN EN 14470-2
39-201270-067

Art.: 39-201270-067

HSC line
according to DIN EN 14470-1
Components basket for dipping tank models 4.271.10 and 4.273.11

Art.: 4.270.03

Components basket for dipping tank models 4.271.10 and 4.273.11
2.00.397-1

Art.: 2.00.397-1

Filter unit for vapours of solvents with whisper-quiet ventilator and exhaus air monitor, 43 dB(A)
2.00.393

Art.: 2.00.393

Filter set for models 2.00.390/397 for vapours of solvents
2.00.360

Art.: 2.00.360

Exhaust air monitor without ventilator
29-80970-074

Art.: 29-80970-074

Temperature probe COOL dual XL
Shelf for screw cap to be mounted on cylinder holder

Art.: 79-80960-140

Shelf for screw cap to be mounted on cylinder holder
79-80660-152

Art.: 79-80660-152

Installation rails (2 pcs.) for SUPREME plus S, M
29-80660-214

Art.: 29-80660-214

Shelf for CLASSIC S, M and PREMIUM M, stainless steel
2.00.393

Art.: 2.00.399S

Filter set for models 2.00.390/397 for vapours acids
29-201267-053_2

Art.: 29-201267-053

CLASSIC line pro
according to DIN EN 14470-1
5.88.003

Art.: 5.88.003

Flame arrester with adapter made from stainless steel
3.88.025

Art.: 3.88.025

Stainless steel dispensing can, capacity: 25 l
73-81260-150

Art.: 73-81260-150

Installation rails (2 pcs.) for ECO XL, sheet steel
Shelf for screw cap to be mounted on cylinder holder

Art.: 79-81460-140

Shelf for screw cap to be mounted on cylinder holder
2.233.04

Art.: 2.233.04

Red Box for MSDS and service documents
Viewed